Fujitsu claims world's lightest laptop title at 634 grams
www.theregister.com
Lightweight 'FMV Zero' is only sold online in Japan, dammit
  • Eager Eagle@lemmy.worldEnglish
    15·
    18 days ago

    Physical connectivity comes courtesy from an RJ45 socket, a pair of USB-A ports, a sole USB-C connector, a microSD slot, and an HDMI connection

    wasn’t expecting that

  • IrritableOcelot@beehaw.org
    7·
    18 days ago

    Can you imagine having a 31 Wh battery for a meteor lake part?

    Also it may be light, but it isnt thin – it says it has a whole RJ-45 port! But other than that the IO is unusably limited.

    • notthebees@reddthat.com
      4·
      18 days ago

      That would be awful. i have a laptop at roughly 31 Wh capacity and it was basically unusable with the 11th gen i5 intel cpu. 2 hours of usable battery life. Take into consideration that batteries tend to live at 80% capacity for a long while and then you realize that laptop will have a 24Wh capacity. Basically two smartphone batteries worth of capacity

    • cmnybo@discuss.tchncs.deEnglish
      3·
      18 days ago

      That battery is way too small. I prefer to have a 100WH battery. It definitely needs a couple more USB ports and an SD card reader.

      • notthebees@reddthat.com
        4·
        18 days ago

        Yeah but then it isn’t as light (but 250 grams is nothing tbh). The 64Wh one is 888 grams. Still less than a kilo which is very impressive. Just under 2 lbs.

        I also hate the lack of USB ports now. That’s about average for the “nice” laptops of this day and age. I hate juggling around my peripherals bc I don’t have enough type c ports. I do hope it’s a barrel plug for charging and not only USB C pd.

          • notthebees@reddthat.com
            3·
            17 days ago

            In my experience, USB c is soldered to the main board while the plug is a small module thats attached to the module. It’s easier to replace a small module than replace a whole USB c port. Ideally it’d be on a seperate board too. But it might be a bit more complex.

            My sister broke one of the two USB c ports on her Thinkpad and if the second one breaks (both support charging), I can’t fix it easily without sending the motherboard out for repair and spending like $200.

            Edit: you can support both USB c and DC plugs. My laptop can (HP pavilion).

            • terminhell@lemmy.dbzer0.com
              1·
              17 days ago

              Power delivery is just as likely to to be soldered to the motherboard as it is to be on a daughter board. It just depends on the particular model. This is for just about every brand.

              I still prefer lenovos square shaped charger ports over just about any other tbh.

              • notthebees@reddthat.com
                1·
                17 days ago

                At least on my pavilion, it’s just one simple daughter board for one of the USB ports. It’s the one I use the most. I can replace it easily if it breaks. The pcb is also very simple so it ends up being very cheap.

                The square shaped one threw me for a loop the first time I worked in a computer with one.

                Very Andersen powerpole esque